No subject


Fri May 18 15:35:00 CEST 2007


does not allow this. Out of the config I have (some trusted networs
configured) I have to say this looks like a bug. Bevor I open a entry in the
bug tracker I would like to have a statement from your site if I understand
all correct meaning that this should work out of the box? I'm not 100% sure
if this should work out of the kolabpolicy and out of the box?

Below the confirmation that authentication is working but only in the local
network and if IP is entered as trusted even it is a none fix IP from the
internet:
 
LOCAL TEST WITH USER ACCOUNT:
****************************
 
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[9033]: connect from
PCG-GRT716S[xxx.xxx.xxx.x]
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[9033]: setting up TLS connection
from PCG-GRT716S[xxx.xxx.xxx.x]
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[9033]: TLS connection
established from PCG-GRT716S[xxx.xxx.xxx.x]: TLSv1 with cipher RC4-MD5
(128/128 bits)
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[9033]: 808249D1F:
client=PCG-GRT716S[xxx.xxx.xxx.x], sasl_method=LOGIN,
sasl_username=domenica at wojnowski.ch
Jun 02 13:12:04 kolab2 <info> postfix/cleanup[8895]: 808249D1F:
message-id=<20070602111204.808249D1F at kolab2.comcept.ch >
Jun 02 13:12:04 kolab2 <info> postfix/qmgr[7038]: 808249D1F: from=<
domenica at wojnowski.ch >, size=649, nrcpt=1 (queue active)
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[9033]: disconnect from
PCG-GRT716S[xxx.xxx.xxx.x]
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[8898]: connect from
localhost[127.0.0.1]
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[8898]: C63539DE2:
client=localhost[127.0.0.1]
Jun 02 13:12:04 kolab2 <info> postfix/cleanup[8899]: C63539DE2:
message-id=<20070602111204.808249D1F at kolab2.comcept.ch >
Jun 02 13:12:04 kolab2 <info> postfix/qmgr[7038]: C63539DE2: from=<
domenica at wojnowski.ch >, size=824, nrcpt=1 (queue active)
Jun 02 13:12:04 kolab2 <info> postfix/smtpd[8898]: disconnect from
localhost[127.0.0.1]
Jun 02 13:12:04 kolab2 <info> postfix/pipe[8896]: 808249D1F:
to=<domenica at wojnowski.ch >, relay=kolabfilter, delay=0, status=sent (kola
b2.comcept.ch)
Jun 02 13:12:04 kolab2 <info> postfix/qmgr[7038]: 808249D1F: removed
 
TEST WITH "NONE FIX IP FROM INTERNET" ENTERED IN TRUSTED NETWORK:
*****************************************************************
 
Jun 02 13:23:23 kolab2 <info> postfix/smtpd[10675]: connect from
100-132.3-85.cust.bluewin.ch[85.3.132.100]
Jun 02 13:23:23 kolab2 <info> postfix/smtpd[10675]: setting up TLS
connection from 100-132.3-85.cust.bluewin.ch[85.3.132.100]
Jun 02 13:23:23 kolab2 <info> postfix/smtpd[10675]: TLS connection
established from 100-132.3-85.cust.bluewin.ch[85.3.132.100]: TLSv1 with
cipher RC4-MD5 (128/128 bits)
Jun 02 13:23:23 kolab2 <info> postfix/smtpd[10675]: 8A8E7A179:
client=100-132.3-85.cust.bluewin.ch[85.3.132.100], sasl_method=LOGIN,
sasl_username=domenica at wojnowski.ch
Jun 02 13:23:24 kolab2 <info> postfix/cleanup[10447]: 8A8E7A179:
message-id=<000001c7a508$5d781260$2101a8c0 at Amilo >
Jun 02 13:23:24 kolab2 <info> postfix/qmgr[10181]: 8A8E7A179:
from=<domenica at wojnowski.ch>, size=2172, nrcpt=1 (queue active)
Jun 02 13:23:24 kolab2 <info> postfix/smtpd[10450]: connect from
localhost[127.0.0.1]
Jun 02 13:23:24 kolab2 <info> postfix/smtpd[10450]: 69BC9A17B:
client=localhost[127.0.0.1]
Jun 02 13:23:24 kolab2 <info> postfix/cleanup[10451]: 69BC9A17B:
message-id=<000001c7a508$5d781260$2101a8c0 at Amilo> 
Jun 02 13:23:24 kolab2 <info> postfix/qmgr[10181]: 69BC9A17B:
from=<domenica at wojnowski.ch>, size=2345, nrcpt=1 (queue active)
Jun 02 13:23:24 kolab2 <info> postfix/smtpd[10450]: disconnect from
localhost[127.0.0.1]
Jun 02 13:23:24 kolab2 <info> postfix/pipe[10448]: 8A8E7A179:
to=<soliva at comcept.ch>, relay=kolabfilter, delay=1, status=sent
(kolab2.comcept.ch)
 
You see that is 100% a confirmation that actually all is working fine but
"only" within local trusted network or if the IP is configured as trusted
network even this solution is not visible (because it is not a fix IP).
 
Except within the postfix.log I have no errors meaning I controlled all logs
(really all :-).
 
Any help and explanation/statement really appriciated.
 
Many thanks
 
Andrea

Mail: soliva at comcept.ch 



More information about the Kolab-devel mailing list